Weight - no more than 1 kg. Heating time to operating temperature: 5-7 min. The length of the electric cord is 2 m.Portable electric generator - 220/12 V. Step-down transformer - 220 / 12V. Start-up charger to the car at 12 V. The work of the knife provides short-term cycles during which it cools when cutting off the zabrus and heats up while the beekeeper prepares the next frame.
The time of the knife stay in the switched-on state is unlimited. The knife blade is made of high quality stainless steel. When installing the knife on the trimming device, care should be taken to protect the sharp tip of the blade from damage and nicks. The tip of the knife should not crash into the wooden bar of the frame.
Cutting edges of the knife are sharpened strictly in one plane so when installing it you need to adjust the whole cutting plane at once. When installing 2 knives vertically, ensure the parallelism of the cutting edges. Store than necessary in a dry place at t ° - 0 ° - 40 ° C.
The supply wires must be fixed to the frame of the device outside the area of the frame and falling of the cuttings so that it does not interfere with the work. The location of the power source should also not interfere with operation.
The type and location of the circuit breaker must provide protection against ingress of honey and moisture when servicing the device. It is recommended to place the switch at the power source. The design of the knife is collapsible. It is not allowed to connect the knife directly to 220 V.
When using the power supply from a step-down transformer, the voltage can be exceeded within the range of 12 - 20 V. Use the knife as intended.Please view my other products and items for sale. The item "Beekeeping Electric Knive x2 Uncapping of Beehive frames New (12 Volt)" is in sale since Sunday, August 26, 2018. This item is in the category "Pet Supplies\Beekeeping".ltd" and is located in Kiev. This item can be shipped worldwide.